Experiment FF - 10.1016/j.bbamem.2012.05.007/4
| Article DOI | 10.1016/j.bbamem.2012.05.007 | ||||||
|---|---|---|---|---|---|---|---|
| Data DOI | N/A | ||||||
| Internal ID | 10.1016/j.bbamem.2012.05.007/4 | ||||||
| Membrane composition (molar fraction) |
|
||||||
| Solution composition |
|
||||||
| Temperature (K) | 333 | ||||||
| Total hydration | 97.5 (mass %) | ||||||
| pH | UNKNOWN | ||||||
| Reagent sources |
|
||||||
| Sample protocol | Up to 60 mg of lipid was mixed with 1.5 ml 0.1 M NaCl and temperature cycled through the main phase transition until a uniform MLV dispersion was obtained. MLVs were then extruded through 500-Å polycarbonate filters. SUVs were diluted to a final lipid concentration of ~20 mg/ml. | ||||||
| X-ray detector | FLICAM CCD camera, 1024 x 1024 pixels, 71 x 71 µm pixel size | ||||||
| X-ray source | G1 station, CHESS | ||||||
| X-ray wavelength (nm) | 1.18 | ||||||
| X-ray beam size (mm) | 0.24 x 0.24 mm | ||||||
| X-ray distance to sample (m) | 0.4236 | ||||||
| X-ray data type | batch | ||||||
| X-ray exposure time (s) | N/A | ||||||
| X-ray number of frames | N/A | ||||||
| X-ray sample type | SUV | ||||||
| X-ray Q-range (Å⁻¹) | N/A | ||||||
| Show on GitHub | experiments/FormFactors/10.1016/j.bbamem.2012.05.007/4 main |